Course Title: Construct removable acrylic partial dentures

Part B: Course Detail

Teaching Period: VE 2018

Class Number: All

Class Section: All

For flexible terms and optional semesters, a Part B course guide may have been published for the entire teaching period, or for the specific class number in which you are enrolled. If there is no Part B course guide published for your specific class number, please refer to the guide for the teaching period in which you are enrolled. Enrolment Online is the definitive source for details regarding your class enrolment.

Course Code: DENT5867C

Course Title: Construct removable acrylic partial dentures

School: 174T School of VE Engineering, Health & Science

Campus: City Campus

Program: C5373 - Diploma of Dental Technology

Course Contact: Rachael Starr

Course Contact Phone: +61 3 9341 1420

Course Contact Email: rachael.starr@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Nominal Hours: 60

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

None

Course Description

This unit of competency describes the skills and knowledge required to construct removable acrylic partial dentures.

This unit applies to work in dental technology


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

HLTDET007 Construct removable acrylic partial dentures

Element:

1. Design acrylic removable partial denture

Performance Criteria:

1.1 Confirm the survey of the model carried out by the operator

1.2 Confirm design and transfer to master model

1.3 Block-out undesirable undercuts

1.4 Scribe food lines

1.5 Duplicate master model to create a working model

Element:

2. Select and prepare materials

Performance Criteria:

2.1 Select materials according to laboratory work order

2.2 Establish shape and dimension of component parts from design

Element:

3. Arrange artificial teeth

Performance Criteria:

3.1 Select teeth and position in wax to establish aesthetics and function

3.2 Contour wax so that denture is suitable for try-in.

3.3 Decontaminate denture according to infection control guidelines and place in a suitable container for dispatch

Element:

4. Construct retainer units.

Performance Criteria:

4.1 Construct components as required

4.2 Join components as required

4.3 Secure teeth and components in wax

4.4 Contour facial and lingual aspects

4.5 Secure appliance for processing

Element:

5. Select and prepare materials and processing technique

Performance Criteria:

5.1 Identify the appropriate polymer system for case

5.2 Identify the appropriate investment technique

5.3 Identify the appropriate processing cycle

5.4 Select polymeric material to construct the prosthesis

5.5 Prepare system components in accordance with manufacturers’ instructions

5.6 Allow materials to reach application stage

Element:

6. Process denture or appliance

Performance Criteria:

6.1 Apply appropriate investment techniques

6.2 Apply material to investment mould

6.3 Process the polymeric material for the correct length of time at the correct temperature

6.4 Devest model and remove any processing irregularities and sharp edges before fitting onto master model

6.5 Confirm accuracy of retainer units

Element:

7. Finish denture or appliance

Performance Criteria:

7.1 Reposition models on the articulator where possible

7.2 Assess the articulated prosthesis and confirm that articulation is appropriate where possible

7.3 Make any necessary adjustments to maintain original vertical dimension

7.4 Polish the non-fitting surface of the prosthesis to create a smooth high shined surface

7.5 Evaluate the finished prosthesis

7.6 Decontaminate the finished prosthesis in accordance to infection control procedures

7.7 Place in a sealed container ready for dispatch


Learning Outcomes


On completion of this course, you should be able to:

  1. Design acrylic removable partial denture 
  1. Select and prepare materials 
  1. Arrange artificial teeth 
  1. Construct retainer units 
  1. Select and prepare materials and processing technique 
  1. Process denture or appliance 
  1. Finish denture or appliance

 


Details of Learning Activities

You will learn through a number of planned activities (face to face classes, simulated workplace learning, online learning and other forms of structured teaching and learning). You will be observed and assessed through their planned activities throughout the duration of the course


Teaching Schedule

Delivered in classrooms and simulated laboratories, schedules vary from group to group so schedule is posted on CANVAS.


Learning Resources

Prescribed Texts


References


Other Resources

 

CANVAS


CANVAS is an online resource with the lesson plans for each unit. Within CANVAS are the session lessons plans, assessments, resources and other materials required for completion of each unit of competency. CANVAS Collaborate is an on-line delivery system within CANVAS that may be utilised as a virtual classroom that may be a part of the overall lesson delivery plan. 



Overview of Assessment

To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.


Assessment Tasks

 Before the critical aspects of evidence are considered all prerequisites must be met.

 

Assessments

Assessment:Task 1

Practical assessment, read and correctly interpret work orders, fabricate appliances

Assessment:Task 2

Practical assessment, critically evaluate practical work to meet technical laboratory and clinician requirements

Assessment:Task 3

Theory assessment, written exam

 


Assessment Matrix

 

Elements/Performance Criteria Covered

Ass 1

Ass 2

Ass 3

1.1

x

 

 

1.2

x

 

 

1.3

x

 

 

1.4

x

 

 

1.5

x

x

 

2.1

x

x

 

2.2

x

x

 

3.1

 

x

x

3.2

 

x

x

3.3

 

x

x

4.1

 

 

x

4.2

 

 

x

4.3

 

 

x

4.5

 

x

x

5.1

x

x

x

5.2

x

x

 

5.3

x

x

 

5.4

x

x

 

5.5

 

 

x

5.6

 

 

x

6.1

 

 

x

6.2

x

 

x

6.3

x

 

x

6.4

x

 

x

6.5

 

 

x

7.1

 

x

x

7.2

 

x

x

7.3

 

x

x

7.4

 

x

x

7.5

 

x

x

7.6

 

x

x

7.7

 

x

x

 

To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.

Other Information

Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
• Relevant
• Current 
• Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
 


Study and learning Support: 
Study and Learning Centre (SLC) provides free learning and academic development advice to you. 
Services offered by SLC to support your numeracy and literacy skills are:
assignment writing, thesis writing and study skills advice 
maths and science developmental support and advice
English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support

Assessment Submission:
Turnitin
Turnitin is an online text-matching service which can be used to support academic integrity and address plagiarism. All submissions via Turnitin within Canvas include the relevant wording for the e-Submission authorisation process. Students are to use Turnitin. to verify that the work submitted is their own work and referenced accordingly. This software will be used by all staff to ensures original work by students is checked at the submission of the assessment.
e-Submission

The University is obliged to obtain clear student authorisation on all assessable works. RMIT’s e-Submission process provides a valid authorization equivalent to a signature on a paper cover sheet allowing students to submit assessment works electronically.
The e-Submission process requires that specific wording and a link to the assessment declaration is included in your assessment documentation in order to comply with legal and statutory obligations, and can be used with all RMIT teaching technologies, including;
• Canvas
• WebLearn
• RMIT’s Google Apps for Education (Gmail, Drive, Sites etc.)
The use of fully electronic submissions saves significant time for both staff and students.

Good practice
• Providing clear advice to students on the e-Submission process as part of their assessment expectations assists in ensuring that it is straightforward for RMIT students to submit work electronically.
• Students can submit non-electronic works via conversion by a digital scanner, i.e. paper-based assessments can be scanned and submitted for assessment via the e-Submission process.
• Establishing a Turnitin assignment in Canvas is a quick way to provide an e-Submission process for a class group.
Students must submit all assessment task electronically via Canvas as directed by their teacher. 
Students are not to email or hand assessment tasks to teachers in class, corridor or cafeteria etc


Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.

The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Assignments submitted late without the approval of an extension will not be accepted or marked.
Refer to RMIT University Policies and Procedures, verify for most recent version.
 

Special consideration:
Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration

Plagiarism:
Plagiarism may occur in oral or written presentations. Plagiarism is the presentation of another person’s work, idea or creation as one’s own; without appropriate referencing. Plagiarism is not acceptable. The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct, which may result in cancellation of results and exclusion from your course.

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism

Course Overview: Access Course Overview