Course Title: Set up manufacturing processes for engineering applications
Part B: Course Detail
Teaching Period: Term1 2013
Course Code: MIET7503
Course Title: Set up manufacturing processes for engineering applications
School: 130T Vocational Engineering
Campus: City Campus
Program: C6069 - Advanced Diploma of Engineering Technology
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: engineering-tafe@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
George Zouev
Mechanical Engineering, Level 5, Bldg 57.
Email: george.zouev@rmit.edu.au
Phone: +61 3 9925 4935
Frank (Yanan) Wang
Mechanical Engineering, Level 5, Bldg 57.
Email: yanan.wang@rmit.edu.au
Phone: +61 3 9925 4310
Nominal Hours: 40
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
It is recommended the the learners attempting this unit have the required knowledge and skill as described in:
VBP263: Apply Basic Principles of Material Science to Engineering Applications
VBP264: Apply Advanced Principles of Material Science to Engineering Applications
Course Description
This unit covers the skills and knowledge required to select and set up principal methods of manufacturing in the manufacturing industry, including bulk metal forming operations, fabrication, powder metallurgy, machining, computer numerical control, manufacturing automation, non-traditional manufacturing, lean and sustainable manufacturing.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication. However, practice in this unit is subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships and traineeships.
This unit of competency is intended for courses at diploma or higher levels.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
VBP250 Set up manufacturing processes for engineering applications |
Element: |
1. Identify principal engineering processes within the manufacturing industry |
Performance Criteria: |
1.1 OH&S and environmental requirements for a given work area are obtained and understood. |
Element: |
2. Select engineering processes for specified manufacturing applications |
Performance Criteria: |
2.1 OH&S requirements for carrying out the work are followed. |
Element: |
3. Implement selected engineering processes |
Performance Criteria: |
3.1 OH&S requirements for carrying out the work are followed. |
Learning Outcomes
1. Planning
- sequencing operations
- identifying factors influencing process selection
- materials and process preparation
- properties and characteristics of materials and consumables
- identifying and clarifying application requirements
- identifying specifications and required resources
- reviewing and revising outcomes against task objectives and requirements
- researching and interpreting information and specifications
- categorising manufacturing methods
- developing enterprise procedures
- calculations relating to engineering processes within the scope of this unit
- accessing and using information sources using a variety of methods
- use of equipment suppliers’ printed data and websites
- accessing and using alternative information sources
- documenting of methods, processes & construction techniques and manufacturing requirements
- applications, features and principles of engineering processes
- advantages and disadvantages of engineering processes
- Forming
- Casting
- Sand
- Die
- Shell
- Continuous
- Investment
- Permanent mould
- Forging
- Drop
- Press
- Rolling
- Drawing
- Extrusion
- Direct
- Indirect
- Impact
- Pressworking
- Basic types of presser
- Blanking
- Piercing
- Bending
- Deep drawing
- Powder Metallurgy
- Powders
- Forming methods
- Sintering
- Hot pressing
- Finishing
- Economics
- Automatic Lathes
- Copying
- Single spindle turret
- Multi-spindle
- Sliding head (Swiss)
- Plugboard
- Economics
- Grinding
- Surface
- Horizontal and vertical spindle
- Reciprocating and rotating table
- Cylindrical
- Centreless
- External
- Internal
- CNC
- Principles of control
- Machines and axes
- Turning machines
- Machining centres
- Applications to manufacturing cells and FMS
- scientific principles relevant to engineering processes
- applying scientific principles in the choice of methods, processes & construction techniques
- the provision for particular materials properties in the choice of methods, processes & construction techniques
- factors affecting process selection
- the suitability of application to particular continuous, mass, batch, jobbing shop, sequential or cellular manufacture and assembly
- identifying and considering materials properties in the choice of methods, processes & construction techniques
- regulations, standard procedures and MSDS specifications
- manufacturing requirements
- selecting methods, processes and construction techniques suitable for continuous, mass, batch or jobbing shop production, work cell or sequential manufacture and assembly
- applications suitable for a range of materials handling techniques
- principles of TQM, JIT and Competitive (lean manufacturing)
- requirements of TQM, JIT and Competitive (lean manufacturing) environments
- calculations and assumptions for processes & construction techniques choices
- materials handling processes and procedures
Details of Learning Activities
Students will participate in a variety of learning methods including: lectures, tutorials,practicals, class discussion, group/individual work on projects, and interaction with individuals and groups as required.
Teaching Schedule
Please note: while your teacher will cover all the materials in the schedule, the weekly teaching and assessment order is subject to change depending on class needs and availability of resources.Students are required to self study the learning materials for the hours not scheduled in teaching schedule.
Week Topic Content Delivery Including Learning activities Performance Criteria Assessment task
Session 1 Introduction to Manufacturing
Definition of Manufacturing
- Materials and Processes used in Manufacturing
- Development of Manufacturing
Class activity: Introduction to Manufacturing. Discussion on the manufacturing cycle from concept to output.
Video: Introduction to Manufacturing
Elements: 1, 2, 3
Assignment scheduled for session 7
Engineering Materials Used in Manufacturing
- Metals
Plain Carbon Steel
Alloy Carbon Steel
HSLA Steel
Stainless Steels
Cast Irons
Titanium
Aluminium Alloys
Copper Alloys
Powdered Metals
Nickel Alloys
Super Alloys
- Non-metals
- Engineering Plastics
- Elastomers
- Advanced Composites
- Ceramics
Class activity: Discussion focusing on the primary materials utilised in mainstream manufacturing.
Tutorial chapter 2 questions,
Set Up Manufacturing Processes for Engineering Applications, RMIT Press
Elements: 1,2,3
Assignment scheduled for session 7
Session 2-4 Forming Technologies
- Casting
Sand
Die
Shell
Continuous
Investment
Permanent Mould
- Forging
Drop
Press
Upset
- Rolling
- Drawing
Deep
Wire
- Extrusion
Direct
Indirect
Impact
- Press-working
Blanking
Piercing
Bending
Deep Drawing
- Explosive forming
- Spinning
- Powder metallurgy
Class activity: Discussion on Cast and Wrought Forming Technologies.
Distinguishing hot and cold working attributes and limitations. Preparation of metals.
Grain structure, formation, growth, refinement and recrystallisation
Videos:
Casting
Rolling
Extrusion
Drawing
Forging
Press working
Explosive forming
Powder metallurgy
Case studies.
Tutorial chapter 3 questions and
Tutorial chapter 4 questions:
Set Up Manufacturing Processes for Engineering Applications, RMIT Press
Elements: 1, 2, 3
Assignment scheduled for session 7
Session 5 Surface Texture as Applied to Manufacturing Processes
- Drawing Symbols
- Surface Roughness Applications
Class activity: Discussion on surface texture as developed by manufacturing process.
Case studies.
Elements: 1, 2, 3
Assignment scheduled for session 7
Session 6-7 Orthogonal Machining
- Introduction
- Fundamentals
- Turning
- Boring
- Facing
- Parting
- Drilling
- Reaming
- Knurling
- Lathe Design and Terminology
- Automatics Lathes
- Drilling machine and tooling
- Milling Machines and tooling
Class activity: Discussion on Machining and cutting tools.
Video: Machining principles, cutting tools
Case studies
Tutorial chapter 7 questions:
Set Up Manufacturing Processes for Engineering Applications, RMIT Press
Elements: 1, 2, 3
Assignment scheduled for session 7 is to be sumitted in this session.
Session 8 Abrasive Machining
- Processes
- Principles
- Abrasives
- Grain size and Geometry
- Wheel Structure and Grade
- Bond Strength
- Dressing
- Geometry
- Cutting Fluids
- Grinding Machines
- Surface
Horizontal and Vertical Spindle
Reciprocating and Rotating Table
- Cylindrical
- Centreless
Internal
External
- Mounted Wheels
- Coated Abrasives
- Honing
- Lapping
- Super Finishing
Class activity: Discussion on Abrasive machining processes and tools.
Video: Abrasive machining processes
Case studies
Tutorial chapter 8 questions:
Set Up Manufacturing Processes for Engineering Applications, RMIT Press
Elements: 1, 2, 3
End semester test scheduled for session 16
Session 9-10 Manufacturing Automation
- Introduction
- Levels of Automation
- Feedback and control
- Computer Numerical Control
- CNC Applications to Manufacturing Cells and Flexible
- Manufacturing Systems
- Robotics
Configurations
Applications
Class activity: Discussion on Manufacturing Automation, FMS and Robotics.
Video: CNC and FMS systems
Case studies.
Tutorial chapter 9 questions:
Set Up Manufacturing Processes for Engineering Applications, RMIT Press
Elements: 1, 2, 3
End semester test scheduled for session 16
Session 11-13 Non-Traditional Manufacturing
Rapid Prototyping
Lean Manufacturing (TQM, JIT)
- Non-traditional machining
- Chemical machining processes
- Photochemical machining
- Design factors
- Mechanical non-traditional processes Ultrasonic
Waterjet
Abrasive waterjet cutting
Abrasive waterjet machining
Abrasive flow machining
- Thermal Non-Traditional Machining processes
Electrical Discharge machining
Wirecut EDM
Particle Beam Machining
Laser Beam Machining
Plasma beam cutting
- Rapid Prototyping
- Lean Manufacturing
Principles of Total Quality Management
Just in Time
Six Sigma
Class activity: Discussion on Non-traditional manufacturing: Chemical, Electrochemical, Mechanical and Thermal systems.
Video: Non-traditional Machining
Case studies.
Tutorial chapter 10 questions:
Set Up Manufacturing Processes for Engineering Applications, RMIT Press
Elements: 1, 2, 3
End semester test scheduled for session 16
Session 14 Planning and Communication
- Process selection and suitability of process for applications in manufacturing
- Sequencing operations
- Documentation, researching and identifying specifications for manufacturing requirements
Class activity: Discussion on planning and communication of manufacturing processes.
Case studies.
Tutorial: Process selection, sequencing
Elements: 1, 2, 3
End semester test scheduled for session 16
Session 15 OH&S Requirements
- Legislation
- Protective equipment
- Material safety management systems
- Hazardous substances and dangerous goods code
- Local safe operation procedures
Class activity: Discussion and Video on OH&S considerations as part of the selection process.
Case studies.
Tutorial: OH&S implementation.
Elements: 1, 2, 3
End semester test scheduled for session 16
Session 16 Unit Competency Test
Elements: 1, 2, 3
This is an closed book test
Learning Resources
Prescribed Texts
MIET7503 (VBP250) Set Up Manufacturing Processes for Engineering Applications, RMIT Press, available from RMIT Bookshop |
References
Fundamentals of Modern Manufacturing, M. P. Groover, John and Wiley & Sons |
Other Resources
Student resource S drive and Blackboard:
S:\Mechanical & Manufacturing Students\MIET7503 (VBP250) Set Up Manufacturing Processes for Engineering Applications\George Zouev
Overview of Assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit:
- demonstrate essential knowledge and skills as described in this unit;
- demonstrate a representative body of performance criteria within a timeframe typically expected of the discipline, work function and industrial environment;
- demonstrate the ability to select and set up principal methods of manufacturing in the manufacturing industry on more than one occasion and in different contexts.
and selecting and implement engineering processes for specified manufacturing applications based on functional specifications and other factors affecting the selection decision.
Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment acitvities to their teacher/assessor. Feedback will be provided throughout this course. Evidence of the student’s competance can be gathered through a variety of methods, including:
- observation of processes and procedures
- oral and/or written questioning on required knowledge and skills
- testomony from supervisors, clients and/or other appropriate personnel
- inspection of the final product or outcome
- a portfolio of documentary evidence
Candidates must gain a pass in all the components of the assessment/s in order to pass this competency.
Assessment Tasks
Assessment 1 – Assignment
This assessment will focus on your ability to: 1. Identify principal engineering processes within the manufacturing industries, 2. Select engineering processes for specified manufacturing applications, and 3. Implement selected engineering processes
It will require you utilise the underpinning skills and knowledge that has been demonstrated in the previous 4 sessions in your classroom and visit. You will be required to identify appropriate manufacturing processes for engineering applications, describe the classification of processes, compare and prioritise the processes suitable for manufacturing and describe the factors that influence those choices to adequately demonstrate this competency’s elements.
The assignment consists of multiple choice and short answer questions and you will be required to select and identify the most appropriate manufacturing process applicable to an engineering design.
This assignment will have a weighting of 40% of the final overall assessment mark and will be based on the first seven weeks of this course as indicated in the teaching schedule.
Assessment 2 – End of Term Test (closed book)
This assessment will focus on your ability to: 1. Identify principal engineering processes within the manufacturing industries, 2. Select engineering processes for specified manufacturing applications, and 3. Implement selected engineering processes
It will require you utilise the underpinning skills and knowledge that has been demonstrated in the previous 4 sessions in your classroom and visit following the mid term test. You will be required to identify appropriate manufacturing processes for engineering applications, describe the classification of processes, compare and prioritise the processes suitable for manufacturing and describe the factors that influence those choices to adequately demonstrate this competency’s elements.
The test consists of multiple choice and short answer questions and you will be required to select and identify the most appropriate manufacturing process applicable to an engineering design.
This test will have a weighting of 60% of the final overall assessment mark and will be based on the remainder of this course as indicated in the teaching schedule. This test does not reassess any of the course material previously assessed in Assessment 1.
Assessment Matrix
Competency / Module | Assessment 1 40% | Assessment 2 60% |
Performance Element 1 | YES | YES |
Performance Element 2 | YES | YES |
Performance Element 3 | YES | YES |
Other Information
Please note: while your teacher will cover all the material in the above schedule, the weekly teaching and assessment order is subject to change depending on class needs and availability of resources.
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to all RMIT students.
Services offered by SLC to support numeracy and literacy skills of the students are:
assignment writing, thesis writing and study skills advice
maths and science developmental support and advice
English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
Students with disability or long-term medical condition should contact Disability Liaison Unit to seek advice and support to
complete their studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit
Late submission:
Students requiring extensions for 7 calendar days or less (from the original due date) must complete and lodge an Application
for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. The student will be notified within
no more than 2 working days of the date of lodgment as to whether the extension has been granted.
Students seeking an extension of more than 7 calendar days (from the original due date) must lodge an Application for Special
Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days
after the official due date.
Assignments submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration
PLAGIARISM:
Plagiarism may occur in oral or written presentations. Plagiarism is the presentation of another person’s work, idea or creation as one’s own; without appropriate referencing. Plagiarism is not acceptable. The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct, which may result in cancellation of results and exclusion from your course.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism
Other Information:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview