Course Title: Design traffic control elements
Part B: Course Detail
Teaching Period: Term1 2016
Course Code: CIVE5695
Course Title: Design traffic control elements
School: 130T Vocational Engineering
Campus: City Campus
Program: C6093 - Advanced Diploma of Engineering Design
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: engineering-tafe@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Muhammad Ozair Mian
School of Vocational Engineering, Health & Sciences (SVEHS)
Civil Engineering
Tel: (03) 9925 8312
Fax: (03) 9925 4189
e-mail: muhamad.mian@rmit.edu.au
Nominal Hours: 20
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
EDX130B Use technical mathematics (basic)
EDX060B Prepare basic mechanical and structural steel drawings to AS1100
Course Description
This unit of competency deals with the skills and knowledge required to design safe and efficient methods of controlling traffic on the road and at the worksite.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
EAC090B Design traffic control elements |
Element: |
1. Apply knowledge of current regulations for vehicular traffic registration and road signage |
Performance Criteria: |
1.1 Current traffic regulations are understood and inform traffic control design. |
Element: |
2. Apply knowledge of human factors that influence signage and intersection design. |
Performance Criteria: |
2.1 Human behaviour characteristics such as observation, concentration and boredom and their effect on intersection design and signage are understood and inform traffic control design. |
Element: |
3. Design and draw guidance methods |
Performance Criteria: |
3.1 Guide post spacing is calculated. |
Element: |
4. Design and draw linemarking, signage and ramped crossings for urban and rural intersections |
Performance Criteria: |
4.1 Line marking, signage and ramped crossings can be designed and drawn for a typical range of urban and rural intersections. |
Element: |
5. Carry out Worksite Traffic Management (WTM) |
Performance Criteria: |
5.1 The rules of WTM are followed. |
Learning Outcomes
Details of Learning Activities
Learning Activities
You will be involved in the following learning activities to meet requirements for this course.
• Lectures/Tutorials
• Practicals/Discussions
• Journals/Research Work/Team Work
• Presentations
• Self-Directed Learning
• Site Visit/Excursion
Teacher-led activities:
Face to face lectures for each element covering fundamental knowledge of traffic control elements/devices, including workplace secenarios through
refernece materials such as videos and reports from relevant organisations.
Student based problem solving and directed study:
Participate in individual and team problem solving activities and directed study which includes research on specific topics.
Engineering employment requires the capacity to work effectively in teams, to communicate effectively in both oral and writing and to learn effectively. In order to prepare students for employment as graduates they will be provided a quality assured teaching and learning environment which is conductive to the development of adult learning. Adult learning is characterised by the students accepting responsibility for their own learning and actively participating in the learning process as individuals and as contributors to the teams. Adult learning is the hallmark of a professional. The specific responsibilities as adult learners in respect of this subject are:
. to be aware of and to observe the regulations related to plagiarism
. to submit (on time) all work for assessment as required
. to complete all pre-reading and preparatory work prior to the class for which it will be used
. to effectively use the academic staff resources provided (consultation time, tutors, e- mail etc)
. to participate as an effective and honest member of a learning team
. to contribute effectively to a group of peers in a climate of mutual respect and to question each other and the academic staff when uncertain
Effective Communication: Presentation of subject material in the most up to date manner. Assessment by way of exams and laboratory reports
Creative Planning & organising activities: Collecting, analysing & organising information.
Ethical responsibilities Introducing Engineers Australia Code of Ethics Observing legislation and statutory requirements. Identifying plagiarism attempts
Team work: Appropriate personnel to be consulted to ensure the work is co-ordinated effectively with others involved on the module activities Team approach in collating and evaluating results of research or testing procedures undertaken
Long-life learners: Encourage self-study through curiosity Some percentage of assessment will test these skills
Professional Attitudes: Presenting professional image Communication, class participation and performance.
Teaching Schedule
Week | Topic | Resources and Activities | Elements / Performance criteria | Assessment Tasks |
1 | Introduction to
Traffic Control Elements Traffic control devices |
Part B course guide – handout
Class notes Activity 1: |
1.1, 1.2, 1.3 |
|
2 | Apply knowledge of Human Factors that Influence- line marking, signage of rural intersection design. |
Activity 1: Directed Study - relevant references/standards |
2.1, 2.2 |
|
3 |
Road signs: Traffic signs |
Activity 1: Activity 2: |
1.1 , 1.2 |
Group Assignment |
4 | Apply knowledge of current regulations for vehicular traffic registration: Highway Safety |
Activitiy1: Activity 1: |
4.1, 4.2 | Group Assignment |
5 | Apply knowledge of current regulations for vehicular traffic registration: Traffic flow theory |
Activity 1: Activity 2: |
1.2, 2.2,4.1
|
Group Assignment |
6 | Apply knowledge of Human Factors that Influence- line marking, signage of urban intersection design: Traffic signal design |
Activity 1: Activity 2: |
4.1, 4.2 |
Group Assignment |
7 | Design and draw guidance methods-guide posts, safety barrier design | Activity 1: |
3.1, 3.2, 3.3, 3.4 |
Group Assignment due week 7 |
8 | Worksite Traffic Management (WTM) - concept and application | Activity 1: Directed Study - relevant standards and policies
|
5.1, 5.2, 5.3, 5.4 |
|
9 | Exam | 1.1, 1.2, 1.3, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 5.1, 5.2, 5.3, 5.4 |
Learning Resources
Prescribed Texts
Guide for the design of intersections at grade’ |
References
Other Resources
1. Work notes.
2. Calculator, ruler and pencil.
3. Prescribed text books
4. Access to blackboard notes.
5. AutoCAD Civil 3d software access.
Overview of Assessment
Assessment are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.
Your assessment for this course will be marked using the following table:
NYC (<50%) Not Yet Competent
CAG (50-59%) Competent - Pass
CC (60-69%) Competent - Credit
CDI (70-79%) Competent - Distinction
CHD (80-100%) Competent - High Distinction
Assessment Tasks
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package.
Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards.
Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor.
Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks section of Course Guide Part B.
Group Assignment : Data collection, analysis and overall study of an intersection (30% weighting)
Final Exam: Theory knowledge and calculations will be assessed (Week 1 to week 8) (70%weighting).
Student has also to show an understanding of Occupational Health and Safety to an extent indicated by the following aspects:
• basic legal requirements covering occupational health and safety in the workplace
• the requirements for personal safety in the workplace
• identifying potential workplace hazards and suggested measures for accident prevention
• working safely with electrical tools or equipment
Assessment requirements also include:
- Attendance and satisfactory completion of prescribed practical exercises ,
- Evidence of participation in and satisfactory completion of work simulation projects.
-Satisfactory completion of class assignment work
-Timely submission and standard presentation for all assessment material / documentation.
Assessment Matrix
Assessment vs EAC090B Elements & Performance Criteria.
Assessments | Performance Criteria | Weightage |
Group Assignment | 1.1, 1.2, 1.3, 2.1, 2.2, 4.1, ,4.2 | 30% |
Final Exam | 1.1, 1.2, 1.3, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 5.1, 5.2, 5.3, 5.4 | 70% |
EAC090B Elements & Performance Criteria | |||||||||||||||
Assessments | 1.1 | 1.2 | 1.3 | 2.1 | 2.2 | 3.1 | 3.2 | 3.3 | 3.4 | 4.1 | 4.2 | 5.1 | 5.2 | 5.3 | 5.4 |
Group Assignment | X | X | X | X | X | X | X | ||||||||
Final Exam | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
Other Information
Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities. The estimated time is minimum 20 hours outside the class time.
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
• Relevant
• Current
• Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
• Assignment writing, thesis writing and study skills advice
• Maths and science developmental support and advice
• English language development
Please refer to http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please refer to http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.
Late Submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for seven calendar days or less (from the original due date) and have valid reasons, you must complete an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than two working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than seven calendar days (from the original due date), you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than two working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special Consideration:
Please refer to http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration.
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the university.
Please refer to http://www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview