Course Title: Apply principles of mechanics to engineering problems
Part B: Course Detail
Teaching Period: Term2 2015
Course Code: MIET7534
Course Title: Apply principles of mechanics to engineering problems
School: 130T Vocational Engineering
Campus: City Campus
Program: C6132 - Advanced Diploma of Engineering Technology
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vocengineering@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Dr. A R M Muniruzzaman
School of Vocational Engineering (SoVE)
Civil Engineering
Tel: (03) 9925 4415
Fax: (03) 9925 4189
E-mail: arm.muniruzzaman@rmit.edu.au
Anita Mehmi
School of Vocational Engineering (SoVE)
Civil Engineering
Tel: (03) 9925 2011
Fax: (03) 9925 4189
E-mail: anita.mehmi@rmit.edu.au
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
Nil
Course Description
This unit of competency sets out the knowledge and skills required to apply mechanics concepts and principles to solve problems common to all engineering fields. This includes forces, moments, friction and frames.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
VU21100 Apply principles of mechanics to engineering problems |
Element: |
1. Identify mechanic principles embedded in an engineering problem |
Performance Criteria: |
1.1 OH&S and environmental requirements for a given work area are obtained and understood. |
Element: |
2. Apply principles of mechanics in the analysis or design of an engineering solution |
Performance Criteria: |
2.1 Relevant OH&S requirements for carrying out the work are followed. |
Element: |
3. Verify, document and interpret outcomes |
Performance Criteria: |
3.1 Relevant OH&S requirements for completing the work are followed. |
Learning Outcomes
Refer to Elements
Details of Learning Activities
Learning activities are listed in powerpoint slides the under Course resourses on the BlackBoard.
You will be involved in the following learning activities to meet requirements for the competency and stage 1 competencies for Engineering Associates:
• Tutorials
• Exams
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA 1. Knowledge and Skill Base
EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.
EA 2. Engineering Application Ability
EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
EA 3. Professional and Personal Attributes
EA 3.1. Ethical conduct and professional accountabilityEA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership
Teaching Schedule
Week |
Topics Delivered | Elements/Performance criteria |
1 |
Introduction to the course and OH&S requirements. Force and gravity, Moment and Torque |
1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.4, 2.5 |
2 | Equilibrium of Forces and Moments | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
3 | Supports, Recations and Free-body diagram | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
4 | Friction | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
5 | TEST and Journal submission | 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
7 | Plane truss; properties | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6 |
7-8 | Plane truss; joint and section method of analysis | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
9 | Axial force, Shear force and Bending moment equations | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
10 | Axial force | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6 |
11-12 | Shear force and Bending moment diagrams | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
13 | Properties of plane figures and Volumes | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
14 | Stress, Strain, poisson’s ratio, modulus of elasticity / rigidity, Factor of safety and allowable stress | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
15 | Thermal stress; coefficient of linear expansion | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
16 | Thin walled pressure vessels; axial and hoop stress | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
17/18 | EXAM and Journal submission | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3, 3.4, 3.5 |
Learning Resources
Prescribed Texts
"Engineering Mechanics" Val Ivanoff " "Structural Mechanics" Nageim/Durka/Morgan/Williams |
References
Other Resources
- Multimedia Resource
- Recommended Videos and DVDs
- RMIT online learning resources are located on RMIT Online Learning Hub. Follow the link to log in http://www.rmit.edu.au
- The Learning Hub ( Blackboard) is the central point of access to the online courses in which students are registered.
Overview of Assessment
Assessments are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.
Assessment 1: Test Part A
Weighting towards final grade (%): 30
Assessment 2: Journals
Weighting towards final grade (%): 20
Assessment 3: Test Part B
Weighting towards final grade (%) 50
These tasks assess the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Element/Performance Criteria Covered | Assessment 1 - Test Part A | Assessment 2- JOURNALS | Assessment 3- Test Part B |
1.1 | x | x | |
1.2 | x | x | |
1.3 | x | x | |
1.4 | x | x | |
1.5 | x | x | |
1.6 | x | x | |
2.1 | x | x | |
2.2 | x | x | |
2.3 | x | x | |
2.4 | x | x | |
2.5 | x | x | |
2.6 | x | x | |
3.1 | x | x | |
3.2 | x | x | |
3.3 | x | x | |
3.4 | x | x | |
3.5 | x | x |
Assessment Tasks
This is a competency-based course and competency must be demonstrated for each element (shown above) to achieve
competency for the course.
The elements and performance criteria are contained within the topics as listed in the teaching schedule on the BlackBoard.
Each topic will be assessed using the form of assessment and weighting shown below.
Please note that the topics listed in the assessment matrix below refer to the topics in the learning guide and teaching
schedule and do not refer to the elements shown above.
Assignment task will require a student to demonstrate that all the tutorial problems have been genuinely attempted and need
to be submitted as evidence of the work done in order to receive the allocated marks.
ASSESSMENTS WEIGHTING AND SUBMISSION WEEK
TEST 30 % WEEK 5
JOURNAL 1 5 % WEEK 5
JOURNAL 2 15 % WEEK 17
EXAM 50 % WEEK 17 / 18
Assessment Matrix
Assessment vs VU2100 Elements & performance criteria
VU2100 Elements & performance criteria | |||||||||||||||||
Assessments | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 3.1 | 3.2 | 3.3 | 3.4 | 3.5 |
TEST | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
JOURNAL 1 | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
JOURNAL 2 | x | x | x | x | x | x | x | x | x | x | x | ||||||
EXAM | x | x | x | x | x | x | x | x | x | x | x |
Assessment vs Engineers Australia stage 1 competencies
Engineers Australia stage 1 competencies |
||||||||||||||||
Assessments | EA 1.1 | EA 1.2 | EA 1.3 | EA 1.4 | EA 1.5 | EA 1.6 | EA2.1 | EA2.2 | EA2.3 | EA2.4 | EA3.1 | EA3.2 | EA3.3 | EA3.4 | EA3.5 | EA3.6 |
TEST | 2 | 3 | 1 | 1 | 0 | 0 | 2 | 2 | 1 | 0 | 0 | 0 | 0 | 1 | 2 | 0 |
JOURNAL 1 | 2 | 3 | 1 | 1 | 0 | 0 | 2 | 2 | 1 | 0 | 1 | 0 | 2 | 1 | 2 | 0 |
JOURNAL 2 | 3 | 3 | 1 | 1 | 1 | 0 | 3 | 3 | 1 | 0 | 1 | 0 | 2 | 2 | 2 | 0 |
EXAM | 3 | 3 | 1 | 1 | 1 | 0 | 3 | 3 | 1 | 0 | 0 | 0 | 0 | 2 | 2 | 0 |
All assessments VU2100 | 2 | 3 | 1 | 1 | 1 | 0 | 3 | 3 | 1 | 0 | 1 | 0 | 2 | 2 | 2 | 0 |
0 | Graduate attribute is not assessed. | |||||||||||||||
1 | Graduate attribute is assessed in at least one, but less than one-third, of the Element. | |||||||||||||||
2 | Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element. | |||||||||||||||
3 | Graduate attribute is assessed in more than two-thirds of the Element. |
Other Information
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes
through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that
you have already completed learning and/or gained industry experience that is:
• Relevant
• Current
• Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC
to support your numeracy and literacy skills are:
• Assignment writing, thesis writing and study skills advice
• Maths and science developmental support and advice
• English language development
Please refer to http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice
and support to complete your studies.
Please refer to http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.
Late Submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for seven calendar days or less
(from the original due date) and have valid reasons, you must complete an Application for Extension of Submittable Work (7
Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more
than two working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than seven calendar days (from the original due date), you must
lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior
to, but no later than two working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be
accepted or marked.
Special Consideration:
Please refer to http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration.
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the university.
Please refer to http://www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview