Course Title: Develop engineering solutions for induction machine and control problems

Part B: Course Detail

Teaching Period: Term1 2025

Course Code: EEET7567C

Course Title: Develop engineering solutions for induction machine and control problems

Important Information:

Please note that this course has compulsory in-person attendance requirements for some teaching activities.

School: 520T Future Technologies

Campus: City Campus

Program: C6182 - Advanced Diploma of Engineering Technology - Electrical

Course Contact: Mr. Noor Sateh

Course Contact Phone: +61399254013

Course Contact Email: noor.sateh@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

William Lau

Ph: +61 3 9925 4703

Email: william.lau@rmit.edu.au

 

 

 

Nominal Hours: 60

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

UEECD0007 Apply work health and safety regulations, codes and practices in the workplace

UEEEL0062 Provide engineering solutions to problems in complex polyphase power circuits

UEECD0036 Provide engineering solutions for problems in complex multiple path circuit

UEECD0039 Provide solutions to basic engineering computational problems

and

UEECD0041 Solve electrotechnical engineering problems

or

UEECD0043 Solve problems in direct current circuits

UEEEL0019 Solve problems in direct current (d.c.) machines

UEEEL0021 Solve problems in electromagnetic devices

or

UEECD0044 Solve problems in multiple path circuits

UEECD0046 Solve problems in single path circuits

UEEEL0019 Solve problems in direct current (d.c.) machines

UEEEL0021 Solve problems in electromagnetic devices

or

UEEEC0074 Troubleshoot resonance circuits in an electronic apparatus

UEEEC0065 Solve problems in basic electronic circuits

Course Description

This unit involves the skills and knowledge required to develop engineering solutions for induction machine and control problems.

It includes working safely; determining problems; obtaining induction machine operation, construction and application; gathering and analysing solutions; applying problem-solving techniques; and developing and documenting solutions.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEEEL0043 Develop engineering solutions for induction machine and control problems

Element:

1 Prepare to develop engineering solution for induction machine problems

Performance Criteria:

1  

Prepare to develop engineering solution for induction machine problems 

1.1 

Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied

 

 

1.2 

WHS/OHS risk control measures and workplace procedures in preparation for the work are followed

 

 

1.3 

Scope of induction machine problem is determined from performance specifications and/or documentation and in consultation with relevant person/s

 

 

1.4 

Activities are planned to meet scheduled timelines in consultation with others involved in the work

 

 

1.5 

Strategies are formed to ensure solution development and implementation is carried out efficiently

Element:

2 Develop engineering solution

Performance Criteria:

2 

Develop engineering solution 

2.1 

WHS/OHS risk control measures and workplace procedures for carrying out the work are followed

 

 

2.2 

Induction machine construction, operation, characteristics and applications are applied to developing solutions to induction machine problems

 

 

2.3 

Parameters tested, data taken, specifications and performance requirements to each machine problem are obtained in accordance with workplace procedures

 

 

2.4 

Approaches to resolving induction machine problems are analysed to provide most effective solutions

 

 

2.5 

Unplanned events are dealt with safely and effectively in accordance with relevant industry standards and workplace procedures

 

 

2.6 

Quality of work is monitored in accordance with relevant industry standards and workplace procedures

Element:

3 Implement engineering solution and complete documentation

Performance Criteria:

3 

Implement engineering solution and complete documentation 

3.1 

Solutions to machine problems are tested to determine their effectiveness and modified as required

 

 

3.2 

Adopted solutions are documented, including instruction for implementation with risk control measures

 

 

3.3 

Relevant person/s required to implement solutions to induction machine problems is coordinated in accordance with relevant industry standards and workplace procedures

 

 

3.4 

Justification for solutions used to solve induction machine problems is documented in work/project records in accordance with relevant industry standards


Learning Outcomes


Refer to elements of the unit of competency


Details of Learning Activities

You will involve in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates.
• Lectures
• Tutorials
• Practical exercises
• Research activities


Engineers Australia Mapping Information:

Engineers Australia Stage 1 Competencies are mapped with competency UEENEEG145A in the Assessment Matrix.
 

This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:

EA 1. Knowledge and Skill Base

EA 1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.

EA 2. Engineering Application Ability

EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
 

EA 3. Professional and Personal Attributes

EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanor.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.

Learning and simulated work activities to demonstrate an understanding of typical motor problems encountered in meeting performance requirements and compliance standards, revising a motor operating parameters and dealing with motor malfunctions.

* Classroom tutorial activities to consolidate the theory of three-phase electrical systems, operating principles of single-phase motor, three-phase motor, universal motor, controlling devices   for various motors, various motor protection devices.

*Practical exercises involving design and construction of simple electrical motor control circuits and participate in research activities in the application of different control devices for various electrical motors. It involves the development of testing procedure to verify the performance specification, diagnosis of faults in the systems and completion of the commission.

* Research activities to investigate control devices for various types of electrical motors, and various motor protection device applications. It is expected that students would require approximately 20% of course hours to be allocated for independent study to do motor selection criteria, equivalent electrical circuit, motor control circuit design, construction, testing and problem solving activities

Course content:
a) Construction of polyphase induction motors encompassing:
    • squirrel cage motors
    • slip-ring motors
b) Operating principles of polyphase induction motors; rotating magnetic field torque slip
c) Speed-torque relationships in induction motors encompassing:
    • maximum torque
    • torque – slip relationships
    • types of motor squirrel cages
    • power flow in the motors, efficiency
    • torque units
    • slip ring rotors
d) Induction motor performance testing
e) Induction motor starters
    • starting requirements
    • type of starters
    • starting torque
    • starting dynamics
    • mechanical loads
    • starting duration
f) Reduced voltage starting
    • starting dynamics
    • change over conditions
    • starting duration
    • acceleration curves
g) Speed control of induction motors
h) Braking of induction motors
i) Motor protection
j) Motor selection
k) Induction motor maintenance/repair
l) Single phase induction motors
m) motor commissioning

Develop engineering solutions for induction machine problems include exercises on :

A Understanding the extent of the machine problem.
B Forming effective strategies for solution development and implementation.
C Obtaining machine parameters, specifications and performance requirements appropriate to each problem.
D Testing and solutions to machine problems
E Documenting instruction for implementation of solutions that incorporate risk control measure to be followed.
 

Engineering employment requires the capacity to work effectively in teams, to communicate effectively in both oral and writing and to learn effectively. In order to prepare students for employment as graduates they will be provided a quality assured teaching and learning environment which is conductive to the development of adult learning. Adult learning is characterised by the students accepting responsibility for their own learning and actively participating in the learning process as individuals and as contributors to the teams. Adult learning is the hallmark of a professional. The specific responsibilities as adult learners in respect of this subject are:
. to be aware of and to observe the regulations related to plagiarism
. to submit (on time) all work for assessment as required
. to complete all pre-reading and preparatory work prior to the class for which it will be used
. to effectively use the academic staff resources provided (consultation time, tutors, e- mail etc)
. to participate as an effective and honest member of a learning team
. to contribute effectively to a group of peers in a climate of mutual respect and to question each other and the academic staff when uncertain


Teaching Schedule

The proposed teaching schedule for this competency is detailed below:

 

Week Topics Delivered Elements/Performance Criteria
1

Introduction of Induction Motors /Motor Characteristics

Introduction to course,  course guide, assessment, topics breakdown, resources, WHS/ OHS issues. Electromagnetism, Electric Motor Principles of Operation. 

    		 1.1, 1.2, 1.3, 1.4, 1.5, 1.6
2

 Introduction of Induction Motors /Motor Characteristics

Induction machines:  - Generators, and Motor construction. Speed torque characteristics; Preparation to develop engineering solutions for induction machine problems

    		 1.1, 1.2, 1.3, 1.4, 1.5, 1.6
3

Electric Motor Parameters

Electric Motor Parameters, Interpreting Manufacturers Data, 

    		 1.1, 1.2, 1.3, 1.4., 1.5, 1.6
4

Motor Characteristics

Determining Induction Motor Equivalent Circuit Parameters.

 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
5

Motor Characteristics

Practical exercise

Contactors , DOL Starting and Reversing Induction Motors.

    

2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9

Practical Exercise
6

Motor Characteristics

Written assessment on concepts of Induction motors

    

1.1 to 1.6, 2.1 to 2.9

Task 1
7

Develop engineering Solution for induction motor problems

Practical exercise 

Primary Resistance Starters, Autotransformer Starters.

    

2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10, 2.11

Practical
8

Practical exercise

Star Delta Starters, Test, document and implement engineering solution for induction machine problems. (Practical - Lab 3)

    

2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10, 2.11

Practical
9

Test

Develop engineering solutions for induction motor problems

Test, document and implement engineering solutions for induction machine problems.

    		 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10, 2.11
10

Practical exercise

Induction motor braking methods:

- DC Injection and Plug Braking. 

    

2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10, 2.11

Practical
11

Single Phase Motors, Split Phase Motors, Shaded Pole Motors

 

Single Phase Induction Motors, Split Phase Motors, Shaded Pole Motors.

Test, document and implement engineering solutions for induction machine problems.

    

2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10, 2.11

Test 1 online
12

Induction Motor Starters

Capacitor Start/Run Motors

    

2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10, 2.11

Due Practical Lab A
13

Braking Methods

Speed Control and braking methods of Induction Motors 

    		 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10, 2.11
14

Prms

Selection of AC motors including calculations for Prms

 1.1, 1.2, 1.3, 1.4, 1.5, 1.6
15 Revision for Universal Motor, Motor Protection

1.1, 1.2, 1.3, 1.4, 1.5, 1.6

Due Practical Lab B
16 Motor Control Circuits and Motor Dynamics , Test, document and implement engineering solutions for induction machine problems.

 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10, 2.11

Due Practical Lab C

Test 2 online
17 /18

Final Test

Motor Control Circuits and Motor Dynamics , Test, document and implement engineering solution for induction machine problems. (Final Test)

 Develop engineering solutions for induction machine  problems Assessment feedback, catch-up test,  laboratory work catch-up.

1.1 to 1.6, 2.3, 2.4, 2.5, 2.6, 2.7, 2.9, 2.10, 2.11, 3.1 to 3.4

 

 


All Performance Criteria

 


Learning Resources

Prescribed Texts


References


Other Resources

CANVAS is the central point of access to the online courses in which students are registered.

 


Overview of Assessment

The assessment is conducted in both the theoretical and practical aspects of the course, following the performance criteria set in the National Training Package. 
Assessment methods may encompass a variety of approaches, including written and oral activities, as well as the demonstration of practical skills aligned with 
relevant industry standards. Participants should be aware that they may be asked to personally demonstrate their assessment activities to their teacher or assessor. 
Feedback will be consistently provided throughout the course.To successfully complete this course, you will be required to demonstrate competency in each assessment 
task within this unit. Full assessment details will be provided and can be found on CANVAS.


Assessment Tasks

Assessments are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.

Assessment Task 1: Test 1
Assessment Tasks 2, 3, 4: Practical Lab A, B, C respectively
Assessment Task 5: Test 2 

To be deemed competent, students must achieve Satisfactory (S) results in all assessments.

This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:

CA - Competency Achieved

NYC - Not Yet Competent

DNS - Did Not Submit for Assessment.

Assessment Due Dates

All assessment tasks will have a due date provided and published in Canvas. Assessments submitted after the due date will not be accepted unless an extension has been provided or special consideration has been granted.

Assessment Resubmissions (if Unsatisfactory)

You will be allowed 1 (ONE) resubmission attempt FOR EVERY ASSESSMENT (if unsatisfactory). You will be provided with a new due date by your teacher for your resubmission attempt if a resubmission is required.

If you do not submit your assessment (First attempt) by the due date you will not be eligible for resubmission if unsatisfactory.


Assessment Matrix

Assessment vs UEENEEG145A Elements & Performance Criteria

  UEENEEG145A Elements & Performance Criteria      
 Assessments 1.1 1.2 1.3 1.4  1.5 2.1  2.2   2.3 2.5  3.1 3.2  3.3  3.4  3.5  3.6 3.7 4.1 4.2 4.3
Test 1  X  X   X   X    X  X  X X    X  X  X X  X  X    X  X X
Practical (Labs A, B, C) X X X X X X X X X X X X X X X X X X X
Test 2     X X      X  X X  X  X  X  X  X X  X    X  X

  

Assessment vs Engineers Australia Stage 1 Competencies

  Engineers Australia Stage 1 Competencies
 Assessments EA1.1 EA1.2 EA1.3 EA1.4 EA1.5 EA1.6 EA2.1 EA2.2 EA2.3 EA2.4 EA3.1 EA3.2 EA3.3 EA3.4 EA3.5 EA3.6
Test 1  X  X  X    X  X  X  X  X  X  X  X  X  X  X  
Practical (Labs A, B, C)  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X
Test 2  X  X    X  X  X      X    X  X  X  X  X  X
All Assessments UEENEEG145A 3
 		 3
 		  2  2
 		  3  3  2  2  3  2  3  3  3  3  3  2
0 (Blank) Graduate attribute is not assessed.
1 Graduate attribute is assessed in at least one, but less than one-third, of the Element.
2 Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element.
3 Graduate attribute is assessed in more than two-thirds of the Element.

Other Information

A license to practice in the workplace is required for work involving direct access to plant and equipment connected to installation wiring at voltages above 50 V a.c. or 120 V d.c.

Private study hours are approximately 10 hours for this unit.

Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

  • Relevant
  • Current
  • Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
 

Study Support: 

Study Support provides free learning and academic development advice to you. 
Services offered by SLC to support your numeracy and literacy skills are: 

assignment writing, thesis writing and study skills advice 
maths and science developmental support and advice 
English language development 

Please Refer https://www.rmit.edu.au/students/study-support to find more information about Study and learning Support 

Equitable Learning Services (ELS):

If you are suffering from long-term medical condition or disability, you shou ld contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).

Late submission: 

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager. 
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted. 
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date. 

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked. 


Special consideration: 

Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration 

Plagiarism: 

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University. 

Please Refer: https://www.rmit.edu.au/students/student-essentials/assessment-and-results/academic-integrity to find more information about plagiarism.  
Other Information: 

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

 

Course Overview: Access Course Overview