Course Title: Modify - redesign electronics and communications systems
Part B: Course Detail
Teaching Period: Term2 2023
Course Code: EEET7414C
Course Title: Modify - redesign electronics and communications systems
Important Information:
Please note that this course may have compulsory in-person attendance requirements for some teaching activities.
School: 520T Future Technologies
Campus: City Campus
Program: C6178 - Advanced Diploma of Electronics and Communications Engineering
Course Contact: Noor Sateh
Course Contact Phone: +61399254013
Course Contact Email: noor.sateh@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Teachers
Kemps Cheng
Phone: +61 3 9925 4691Email: kemps.cheng@rmit.edu.au
Appointment by email
Program Manager
Dr. A R M Muniruzzaman (Munir)
Email: munir.muniruzzaman@rmit.edu.au
Appointment by email
Nominal Hours: 20
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
Pre-requisite unit: UEECD0007 - Apply work health and safety regulations, code and practices in the workplace
Course Description
In this course you will gain the skills and knowledge required to modify and redesign electronics and communication systems. You will also develop understanding in:
- safe working practices
- system parameter reconfiguration
- analysis to assure optimum performance
- following procedures
- documenting final modificaiton and settings
This course is delivered and assessed with the following:
- UEEEC0016 - Develop engineering solutions to RF amplifier problems; and
- UEEEC0007 - Commission electronics and communications systems
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
UEEEC0044 Modify/redesign of electronics and communications systems |
Element: |
1. Prepare to modify/redesign electronics and communications system |
Performance Criteria: |
1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are obtained and applied 1.2 WHS/OHS risk control measures and workplace procedures in preparation for work activity are followed 1.3 Safety hazards that have not previously been identified are noted on job safety assessment, assessed and risk control measures implemented 1.4 Appropriate person/s is consulted to ensure the work is coordinated effectively with others involved on the worksite 1.5 System operating parameters are identified by reviewing system specifications and component technical data 1.6 Limitations, use and operation of the electronics and communication system to be modified are determined from original specifications, manufacturer data and industry standards 1.7 Extent of modification is determined from measurements, tests, inspections, system limitations and other relevant requirements 1.8 Specifications and instructions for the modifications are documented in accordance with job requirements and workplace procedures 1.9 Tools, equipment, applications and devices needed for the electronics work are obtained in accordance with workplace procedures and checked for correct operation and safety 1.10 Preparatory work is checked to ensure no unnecessary damage has occurred and complies with job requirements and specifications |
Element: |
2. Generate modification and redesign of electronics and communications system |
Performance Criteria: |
2.1 WHS/OHS risk control measures and workplace procedures for carrying out the work are followed 2.2 Alternative modification is considered and discussed with appropriate person/s 2.3 Safety, functionality and economic considerations are incorporated in the proposed modification design 2.4 Proposed communications system modification complies with job requirements and specifications for system design alteration are documented 2.5 Changes in the use and operation of the communications system as a consequence of the proposed modification are included in the design documentation 2.6 Unplanned situations are responded to in accordance with workplace procedures, discussions with appropriate person/s and job specifications or requirements in a manner that minimises risk to personnel and equipment 2.7 Modification and redesign are carried out efficiently without unnecessary waste of materials or damage to electronics apparatus, the surrounding environment or services using sustainable energy principles |
Element: |
3. Complete design and report modification activities |
Performance Criteria: |
3.1 WHS/OHS risk control work completion measures and workplace procedures are followed 3.2 Proposed modification is checked in accordance with workplace procedures for compliance with relevant job requirements and industry standards 3.3 Worksite is cleaned and made safe in accordance with workplace procedures 3.4 Proposed modification is submitted for appropriate organisational approval and, as required, statutory or regulatory approval 3.5 Approved copies of the communications system modification and redesign documents are issued and copies retained, documented and stored in records in accordance with workplace procedures |
Learning Outcomes
On successful completion of this course you will have developed and applied the skills and knowledge required to demonstrate competency in the above elements
Details of Learning Activities
This course is delivered in a cluster (Communication Engineering) in conjunction with UEEEC0016 (EEET7439C) and UEEEC0007 (EEET7415C). You must enrol in all three courses delivered in this cluster. All the learning and assessment activities will include the components of all UEEEC0016, UEEEC0044 and UEEEC0007. Please refer to the course guide Part B for course UEEEC0016 (EEET7439C) for the learning activities and Engineers Australia Mapping Information.
Teaching Schedule
As this course is delivered in cluster, please refer to the course guide Part B for course UEEEC0016 (EEET7439C) for the proposed teaching schedule.
Learning Resources
Prescribed Texts
References
Other Resources
Students will be able to access information and learning materials through Canvas>Communication Engineering 2 and may be provided with additional materials in class.
List of relevant recommended books, resources in the library and accessible Internet sites will be provided where possible.
During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts.
The University Library has extensive resources and provides subject specialist expertise, research advice, help with referencing and support through:
The Learning Lab
https://www.rmit.edu.au/students/study-support/learning-lab
The Study Support Hub
https://www.rmit.edu.au/students/study-support/study-support-hub
Overview of Assessment
The assessment is conducted in both the theoretical and practical aspects of the course, following the performance criteria set in the National Training Package.
Assessment methods may encompass a variety of approaches, including written and oral activities, as well as the demonstration of practical skills aligned with
relevant industry standards. Participants should be aware that they may be asked to personally demonstrate their assessment activities to their teacher or assessor.
Feedback will be consistently provided throughout the course.To successfully complete this course, you will be required to demonstrate competency in each assessment
task within this unit. Full assessment details will be provided and can be found on CANVAS.
Assessment Tasks
As this course is delivered in cluster, please refer to the course guide Part B for course UEEEC0016 (EEET7439C) for assessment tasks.
Assessment Matrix
As this course is delivered in cluster, please refer to the course guide Part B for course UEEEC0016 (EEET7439C) for assessment matrix.
Other Information
Attendance:
Your learning experience will involve class-based teaching, discussion, demonstration and practical exercises
It is strongly advised that you attend all timetabled sessions. This will allow you to engage in the required learning activities, ensuring you the maximum opportunity to complete this course successfully.
Information about your studies:
You can access My Course through the RMIT website for information about timetables, important dates, assessment dates, results and progress, Canvas etc.
https://www.rmit.edu.au/students
Assessment:
Information on assessment including Special consideration, Adjustments to assessment, (eg. applying for an extension of time):
https://www.rmit.edu.au/students/student-essentials/assessment-and-exams/assessment
Academic Integrity and Plagiarism:
RMIT University has a strict policy on plagiarism and academic integrity. Please refer to the website for more information on this policy.
https://www.rmit.edu.au/students/student-essentials/assessment-and-exams/academic-integrity
Course Overview: Access Course Overview